Pkg 02--Accessory Kit for Rotary Rock Tumblers
- SKU:
- A9-011
Description
Contains the book, Modern Rock Tumbling, 3 pairs of tablespoon measures, 1 each 1/2-cup measure, 1 Polish Stick, 1 Stir Stick, 1 Zoom Spout Oiler, 1 plastic collander and an AccuFill barrel filling gauge.
Related Products
Pkg 01--Grits & Polish Kit for Rotary Rock Tumblers
$146.39
Contains 1 quart of ceramic shapes, 1/2 Gallon of 80-grit Silicon Carbide, 1 quart of 220-grit SiC, 1 pint of 600-grit SiC, 1 pint of 1000-grit SiC, 1 pint of Cerium Oxide polish, and 1 pint of Tin...
Pkg 04--Accessory Kit for Vibratory Rock Tumblers
$45.83
Contains the book, Modern Rock Tumbling, 3 pairs of tablespoon measures, 1 each 1/2-cup measure, 1 Polish Stick, 1 Stir Stick, and 1 Plastic Collander.
Pkg 03--Grits & Polish Kit for Vibratory Rock Tumblers
$152.26
Contains 1 quart of ceramic shapes (CSMs), 1/2 gallon of 220-grit Silicon Carbide (SiC), 1 pint of 600-grit SiC, 1 pint of 1000-grit SiC, 1 pint of Cerium Oxide polish, 1 pint of Tin Oxide polish and...
Double 3-Lb Barrel Rotary Rock Tumbler (Thumler A-R2)
$195.95
Similar to the Lortone 33B, this twin barrel model gives the tumbling operator more options and choices than the single-barrel models. Two 3-Lb capacity barrels and a drive motor. Uses...
Single 15-Lb Barrel Rotary Rock Tumbler (Thumler Model B)
$311.95
This is the Big Guy! One 15-pound capacity barrel with drive motor. Very heavy duty steel drum with replaceable rubber liner--gasketed end closure is secured with wing nuts. For the...
Conversion Kit for Thumler Model B Rotary Tumbler
$95.95
You have a lot of money wrapped up in your Model B single-drum tumbler, now make it more versatile with this kit which converts it to a double 3-pound drum operation. Conversion kit...
Spare 15-Lb Rotary Barrel for Thumler Model B tumbler
$159.95
This is one spare 15 pound barrel, complete with rubber liner, lid and wingnuts for the Thumler Model B tumbler.
Spare Black Shaft Bearing for Lortone QT-6, QT-66 or QT-12 rotary tumbler.
$5.95
This same shaft bearing fits all 4 shaft ends--4 are required for a complete makeover. Yes they are expensive, but Lortone is the only one who makes them.