Knurled Nut for All Lortone Barrels
- SKU:
- A10-015
Description
This is the knurled nut which keeps the lid tight on all Lortone rotary tumbler barrels.
Related Products
Spare Drive Belt for Lortone 3A Tumbler
$3.29
This is one drive belt for a Lortone 3A single-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
Spare Drive Belt for Lortone 33B Tumbler
$3.89
This is one drive belt for a Lortone 33B double-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
Spare Black Shaft Bearing (with large hole) for Lortone 3A Tumbler
$2.49
Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining...
Spare Black Shaft Bearing (with small hole) for Lortone 3A Tumbler
$2.49
Three of these small-hole plastic bearings per 3A Tumbler are required.
Spare Black Shaft Bearing for Lortone QT-6, QT-66 or QT-12 rotary tumbler.
$5.95
This same shaft bearing fits all 4 shaft ends--4 are required for a complete makeover. Yes they are expensive, but Lortone is the only one who makes them.
Accufill Ring for 3-Lb Barrels
$2.95
The Accufill Ring (actually a gauge or template) is just the right size to make sure you have filled your barrel properly. Place the AccuFill Ring on top of the rocks in the barrel and when the...
Spare 3-Lb Thumler Rotary Barrel
$37.95
This is one spare 3 pound barrel, Retaining Ring & lid for the Thumler A-R1, A-R2 and the Model B when converted to 3-Lb barrels.