Lortone Spare Parts

Three of these small-hole plastic bearings per 3A Tumbler are required.

Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining shaft-ends..

This is the white bearing which is used on all four ends of the idler shaft and the drive shaft--4 are required for a complete makeover.  Yes they are expensive, but Lortone is the only one who makes them.

This is the knurled nut which keeps the lid tight on all Lortone rotary tumbler barrels.