Spare Hold Down Clip & Springs for Tagit Model C-40 Tumbler
- SKU:
- A12-015
MSRP:
Now:
$5.49
Was:
— You save
Description
This is one hold down clip (with double spring) for the Tagit Model C-40 vibratory tumbler.
Related Products

Piggyback Unit for Tagit Model B2.5
MSRP:
Now:
$46.95
Was:
Each Piggyback Unit has four retainer springs and one bowl with a lid. Only one left in stock.
MSRP:
Now:
$46.95
Was:

Spare Hold Down Clip & Spring for Tagit Model B-2.5 Tumbler
MSRP:
Now:
$8.03
Was:
This is one hold down clip (with spring) for the Tagit Model B-2.5 vibratory tumbler.
MSRP:
Now:
$8.03
Was:

Spare Drive Belt for Tagit Model A-10 Tumbler
MSRP:
Now:
$4.89
Was:
This is one drive belt for a Tagit Model A-10 vibratory tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$4.89
Was:

Spare Hold Down Clip & Spring for Tagit Model A-10 Tumbler
MSRP:
Now:
$8.03
Was:
This is one hold down clip (with spring) for the Tagit Model A-10 vibratory tumbler.
MSRP:
Now:
$8.03
Was:
Tagit Spider Assembly for the Model A-10 Vibratory Tumbler
MSRP:
Now:
$114.95
Was:
This is the "Spider Assembly" for the famous Tagit A-10 Vibratory Tumbler. The Spider mechanism is the "heart" of a Tagit tumbler. It includes a new shaft with two new bearings already...
MSRP:
Now:
$114.95
Was:
Customers Also Viewed

Spare Drive Belt for Lortone 33B Tumbler
MSRP:
Now:
$3.89
Was:
This is one drive belt for a Lortone 33B double-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$3.89
Was:

Spare Black Shaft Bearing (with large hole) for Lortone 3A Tumbler
MSRP:
Now:
$2.29
Was:
Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining...
MSRP:
Now:
$2.29
Was:

Spare Drive Belt for Lortone 3A Tumbler
MSRP:
Now:
$3.29
Was:
This is one drive belt for a Lortone 3A single-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$3.29
Was:
Tagit Spider Assembly for the Model A-10 Vibratory Tumbler
MSRP:
Now:
$114.95
Was:
This is the "Spider Assembly" for the famous Tagit A-10 Vibratory Tumbler. The Spider mechanism is the "heart" of a Tagit tumbler. It includes a new shaft with two new bearings already...
MSRP:
Now:
$114.95
Was:

Spare Individual Cabber Template, Oval, 16 X 12 mm
MSRP:
Now:
$1.50
Was:
Many customers have asked to purchase individual templates--here they are! This is the 16 X 12 mm size.
MSRP:
Now:
$1.50
Was:

Spare Hold Down Clip & Spring for Tagit Model A-10 Tumbler
MSRP:
Now:
$8.03
Was:
This is one hold down clip (with spring) for the Tagit Model A-10 vibratory tumbler.
MSRP:
Now:
$8.03
Was:

Spare Drive Belt for all other Thumler Tumblers (#401--will not fit Model T or MP-1 Tumblers)
MSRP:
Now:
$6.99
Was:
This drive belt will fit all your Thumler rotary tumblers, except the Model T and the tiny new Model MP-1. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic...
MSRP:
Now:
$6.99
Was:

Spare Black Shaft Bearing (with small hole) for Lortone 3A Tumbler
MSRP:
Now:
$2.49
Was:
Three of these small-hole plastic bearings per 3A Tumbler are required.
MSRP:
Now:
$2.49
Was:

Snappy Grip Ergonomic Paint Bucket Handle Replacement (1 each)
MSRP:
Now:
$3.99
Was:
This is a classy device to reduce pain, numb fingers or the ache of arthritis when you're carrying buckets of material. . It can reduce hand fatigue by distributing the weight over more of the...
MSRP:
Now:
$3.99
Was:

Plastic Collander
MSRP:
Now:
$5.95
Was:
This is a plastic collander which will not mar the rocks like an aluminum collander will--used to pour contents of barrel into while holding it over a paint bucket waste container--keeps the rocks...
MSRP:
Now:
$5.95
Was: