Spare Black Shaft Bearing for Lortone QT-6, QT-66 or QT-12 rotary tumbler.
- SKU:
- A10-017
MSRP:
Now:
$5.95
Was:
— You save
Description
This same shaft bearing fits all 4 shaft ends--4 are required for a complete makeover. Yes they are expensive, but Lortone is the only one who makes them.
Related Products

Spare 3-Lb Lortone Rotary Barrel
MSRP:
Now:
$38.95
Was:
This is one spare 3 pound barrel & lid for the Lortone 3A or 33B tumblers.
MSRP:
Now:
$38.95
Was:

Spare 15-Lb Rotary Barrel for Thumler Model B tumbler
MSRP:
Now:
$159.95
Was:
This is one spare 15 pound barrel, complete with rubber liner, lid and wingnuts for the Thumler Model B tumbler.
MSRP:
Now:
$159.95
Was:

Zoom Spout Equipment Oiler
MSRP:
Now:
$5.49
Was:
This is a plastic bottle of general purpose lubricating oil with a spout that extends or retracts to suit your needs. Comes in handy oiling plastic shaft bearings and tumbler motors, but...
MSRP:
Now:
$5.49
Was:

Spare Black Shaft Bearing (with large hole) for Lortone 3A Tumbler
MSRP:
Now:
$2.49
Was:
Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining...
MSRP:
Now:
$2.49
Was:

Spare Drive Belt for Lortone 33B Tumbler
MSRP:
Now:
$3.89
Was:
This is one drive belt for a Lortone 33B double-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$3.89
Was:
Spare White Shaft Bearing for Lortone 33B, 45C & 3-1.5 Tumblers
MSRP:
Now:
$1.49
Was:
This is the white bearing which is used on all four ends of the idler shaft and the drive shaft--4 are required for a complete makeover. Yes they are expensive, but Lortone is the only one who...
MSRP:
Now:
$1.49
Was:
Customers Also Viewed

Knurled Nut for All Lortone Barrels
MSRP:
Now:
$2.95
Was:
This is the knurled nut which keeps the lid tight on all Lortone rotary tumbler barrels.
MSRP:
Now:
$2.95
Was:

Spare Drive Belt for Thumler Model T and MP-1 Tumblers (#400)
MSRP:
Now:
$4.99
Was:
This drive belt fits only the two Thumler Rotary Tumblers, Model T and Model MP-1. Keep extras in a plastic bag in the refrigerator. Please order the #401 belt for all other Thumler...
MSRP:
Now:
$4.99
Was:

Spare Drive Belt for Lortone 33B Tumbler
MSRP:
Now:
$3.89
Was:
This is one drive belt for a Lortone 33B double-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$3.89
Was:

Spare Black Shaft Bearing (with large hole) for Lortone 3A Tumbler
MSRP:
Now:
$2.49
Was:
Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining...
MSRP:
Now:
$2.49
Was:

Spare Drive Belt for Lortone 3A Tumbler
MSRP:
Now:
$3.29
Was:
This is one drive belt for a Lortone 3A single-3-pound barrel rotary tumbler. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...
MSRP:
Now:
$3.29
Was:


Accufill Ring for 3-Lb Barrels
MSRP:
Now:
$2.95
Was:
The Accufill Ring (actually a gauge or template) is just the right size to make sure you have filled your barrel properly. Place the AccuFill Ring on top of the rocks in the barrel and when the...
MSRP:
Now:
$2.95
Was:

Pair of Tablespoon Measures
MSRP:
Now:
$1.98
Was:
These long handled tablespoon measures will prevent contamination of your batches when measuring your powders. Accurate when filled to the brim. Buy one for every type of powder,...
MSRP:
Now:
$1.98
Was:

Spare Drive Belt for all other Thumler Tumblers (#401--will not fit Model T or MP-1 Tumblers)
MSRP:
Now:
$6.99
Was:
This drive belt will fit all your Thumler rotary tumblers, except the Model T and the tiny new Model MP-1. We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic...
MSRP:
Now:
$6.99
Was:

Spare Hold Down Clip & Spring for Tagit Model B-2.5 Tumbler
MSRP:
Now:
$8.03
Was:
This is one hold down clip (with spring) for the Tagit Model B-2.5 vibratory tumbler.
MSRP:
Now:
$8.03
Was:
Spare White Shaft Bearing for Lortone 33B, 45C & 3-1.5 Tumblers
MSRP:
Now:
$1.49
Was:
This is the white bearing which is used on all four ends of the idler shaft and the drive shaft--4 are required for a complete makeover. Yes they are expensive, but Lortone is the only one who...
MSRP:
Now:
$1.49
Was: