Extra Bowl & Lid for Tagit Model A-10

This is a 10 pound capacity bowl (with lid) for use with the Thumler UV-10 vibratory tumbler.  We recommend separate bowls for Silicone Carbide and polish powders.  Keep a spare...

Just one of these large-hole plastic bearings is required in the 3A Tumbler--it goes on the motor-side of the driving shaft--use three small-hole black bearings for the remaining...

This is one drive belt for a Lortone 33B double-3-pound barrel rotary tumbler.  We recommend you keep a spare in your refrigerator in a well-marked zip-close plastic bag--this keeps the material...

This is the white bearing which is used on all four ends of the idler shaft and the drive shaft--4 are required for a complete makeover.  Yes they are expensive, but Lortone is the only one who...

This is the versatile Tagit "Cabber", an automatic cabochon-making machine.  Once you mount it and set it up, you can make cabochons very quickly.  We like to shape them on a...

This is a full set of all six cabber templates, the same ones which came with your Tagit Cabber.  They last a long time if you are careful with your setups, but you can mess them up in...